Kem®TITE - Epoxy Adhesives

Kem®TITE Epoxy Adhesives exhibit a very strong bond between substrates. One and two component grades available for various applications. The products are:

  • EP101: One component epoxy adhesive, which is heat-cure one component epoxy adhesive exhibits very high bonding strength to metals, magnets, and ceramics.
  • EP202: Kem Tite epoxy adhesive is a two-component room temperature setting adhesive system.
Salient Features:
  • Very high strength bonding
  • Ease of application
  • Excellent dimensional stability
  • No shrinkage
  • Excellent solvent & oil resistance
  • Excellent adhesion on steel, Ceramics, magnets & other metal
  • High shear strength
  • Excellent chemical resistance
  • High temperature resistant (+ 150 & intermittent +200°C)
  • Metal to magnet bonding
  • Metal to metal bonding
  • Magneto rotor assembly
  • Elecrtic motor assembly

Kem®TITE GP - General Pupose Epoxy Putty

Kem®TITE GP Kem Tite GP is a two-component room temperature setting, easy to use general purpose putty. Which has following product:

  • EP201: Kem Tite GP is two-component room temperature setting, easy use epoxy putty.

Kem®SEAL - Polyurethane Sealants

Kem®SEAL PU Sealant: One-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity.
Possesses excellent adhesion to sheet metal, glass, aluminum, stainless steel, lead, copper, ceramic, wood etc.

  • PU 50-FC: One-Component, Moisture cure high-modulus polyurethane sealant.
Typical Applications:
  • Body construction of buses, Cv’s cars
  • Sealing and bonding of ventilation ducts, gutters
  • Sealing of sheet metal seams
  • Vibration reduction in sheet metal assemblies
  • Sealing against water, air, gas, and dust
  • Ageing and weathering resistant
  • Bonds to variety of substrates without the need for pre-treatment
  • High elasticity under various conditions
  • High mechanical performance
  • Paintable

Kem®Vibra-TITE®999 - RTV Grey Silicone

Kem®Vibra-TITE®999 – RTV Grey Silicone Sealant: Designed for use in mechanical assemblies, RTV Silicones creates a “formed-in-place” gasket with excellent resistance to temperature, moisture, vibration, and weathering. RTV Silicones can eliminate the need for costly cut gaskets

  • Kem®Vibra-TITE®999: RTV Grey Silicone Sealant is designed for use in mechanical assemblies.
Typical Applications:
  • Uniform Sealant Consistency over a wide range of temperatures
  • No loss of extrusion or physical properties even applied in sub-zero weather conditions
  • Retains elastomeric properties at temperatures from- 55°C to 260°C
  • Cant be used for intermittent exposure at temperatures up to 315°C
  • Adhesion to many substrates
  • Withstands extreme temp. cycling
  • Excellent chemical resistance
  • One-part formulation
  • Room temperature cure
  • Extremely flexible